msdoc

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<code>
#!/bin/bash
set -e

timedatectl set-timezone Europe/Berlin
timedatectl set-ntp true

echo ',,L,*' | sfdisk /dev/sda

mkfs.ext4 /dev/sda1
mount /dev/sda1 /mnt

pacstrap -K /mnt base linux linux-firmware vim

genfstab -U /mnt >> /mnt/etc/fstab

arch-chroot /mnt <<"EOT"
ln -sf /usr/share/zoneinfo/Europe/Berlin /etc/localtime
hwclock --systohc
echo "de_DE.UTF-8 UTF-8" > /etc/locale.gen
echo "de_DE ISO-8859-1" >> /etc/locale.gen
echo "de_DE@euro ISO-8859-15" >> /etc/locale.gen
echo "en_US.UTF-8 UTF-8" >> /etc/locale.gen
echo "en_US ISO-8859-1" >> /etc/locale.gen
locale-gen
echo "LANG=en_US.UTF-8" > /etc/locale.conf 
echo "KEYMAP=de-latin1" > /etc/vconsole.conf 
echo "vm51" > /etc/hostname
echo -e "password\npassword" | passwd root >/dev/null 2>&1
dd if=/dev/zero of=/swapfile bs=1M count=1024
chmod 600 /swapfile
mkswap /swapfile
echo '/swapfile   none   swap   sw   0 0' | tee -a /etc/fstab
yes | pacman -S grub intel-ucode
grub-install --target=i386-pc /dev/sda
sed -i '/GRUB_TIMEOUT=/s/=5/=2/' /etc/default/grub
sed -i '/GRUB_CMDLINE_LINUX=/s/="/="console=ttyS0/' /etc/default/grub
grub-mkconfig -o /boot/grub/grub.cfg
echo "[Match]" > /etc/systemd/network/lan-ens3.network
echo "Name=ens3" >> /etc/systemd/network/lan-ens3.network
echo >> /etc/systemd/network/lan-ens3.network
echo "[Network]" >> /etc/systemd/network/lan-ens3.network
echo "Address=192.168.1.51/24" >> /etc/systemd/network/lan-ens3.network
echo "Gateway=192.168.1.1" >> /etc/systemd/network/lan-ens3.network
echo "DNS=8.8.8.8 192.168.1.1" >> /etc/systemd/network/lan-ens3.network
systemctl enable systemd-networkd
yes | pacman -S openssh
systemctl enable sshd.service
echo "set enable-bracketed-paste off" >> /etc/inputrc
useradd -m -s /bin/bash user
echo -e "password\npassword" | passwd user >/dev/null 2>&1
yes | pacman -S sudo
usermod -aG wheel user
sed -i '/wheel ALL=(ALL:ALL) ALL/s/^# //g' /etc/sudoers
cd /usr/bin && ln -s vim vi
systemctl enable systemd-timesyncd.service
systemctl enable systemd-resolved
EOT
rm /mnt/etc/resolv.conf

reboot
</code>
<code>
install_arch.txt

# in einem Terminal
telnet localhost 9911

# als root anmelden
loadkeys de-latin1

timedatectl
timedatectl set-timezone Europe/Berlin
( ln -s /usr/share/zoneinfo/Europe/Berlin /etc/localtime )
timedatectl set-ntp true

# Disk partitionieren
Device     Boot   Start      End  Sectors Size Id Type
/dev/sda1          2048  2099199  2097152   1G 82 Linux swap / Solaris
/dev/sda2       2099200 16777215 14678016   7G 83 Linux

mkfs.ext4 /dev/sda2
mount /dev/sda2 /mnt
mkswap /dev/sda1 
swapon /dev/sda1

pacstrap /mnt base linux linux-firmware vim

genfstab -U /mnt >> /mnt/etc/fstab

arch-chroot /mnt

ln -sf /usr/share/zoneinfo/Europe/Berlin /etc/localtime
hwclock --systohc

vim /etc/locale.gen
locale-gen
echo "LANG=en_US.UTF-8" > /etc/locale.conf 

echo "KEYMAP=de-latin1" > /etc/vconsole.conf 

echo "vm51" > /etc/hostname

# mkinitcpio -P

# root Passwort setzen
passwd

pacman -S grub intel-ucode 

grub-install --target=i386-pc /dev/sda
grub-mkconfig -o /boot/grub/grub.cfg

exit
(chroot)

systemctl reboot
systemctl poweroff
</code>
<code>
# Netzwerk
# as root
ip link set ens3 up
ip addr add 192.168.1.51/24 broadcast + dev ens3 
ip route add default via 192.168.1.1 dev ens3 

vim /etc/systemd/network/lan-verbindung.network
   [Match]
   Name=ens3

   [Network]
   Address=192.168.1.51/24
   Gateway=192.168.1.1
   DNS=192.168.1.1 8.8.8.8

systemctl enable systemd-networkd
systemctl start systemd-networkd
systemctl status systemd-networkd

# DNS setup
rm /etc/resolv.conf
# ln -rsf /run/systemd/resolve/stub-resolv.conf /etc/resolv.conf
systemctl status systemd-resolved
systemctl enable systemd-resolved 
systemctl start systemd-resolved 
resolvectl status

ping 8.8.8.8 -c3
( ping google.com )

# SSH
pacman -S openssh
systemctl status sshd.service
systemctl start sshd.service
systemctl enable sshd.service

# copy vm host-keys
cd /etc/ssh
scp user@192.168.1.2:/path/to/ssh* .

# inputrc
echo "set enable-bracketed-paste off" >> /etc/inputrc

# ZSH
pacman -S zsh
wget -O .zshrc http://git.grml.org/f/grml-etc-core/etc/zsh/zshrc

# files in Pakete finden
pacman -S pkgfile
pkgfile --update
pkgfile <file>

# user anlegen
useradd -m -s /bin/bash user
passwd user
</code>
<code>
# misc
# set keyboard in X11
setxkbmap de

# xinit
cp /etc/X11/xinit/xinitrc /home/user/.xinitrc
vi /home/user/.xinitrc
...
fi

exec openbox-session

</code>